Get enough mobile solar energy to satisfy your needs

We have built a cost effective and powerful mobile solar generator that is TRULY mobile and flexible.

Mobile Solar
Generators

Solar generators are clean, renewable and unlimited energy as long as there is sun available. They are quiet and clean and do give off toxic fumes. They can easily be taken camping or used at tailgate parties! Solar generators make more sense for emergency preparedness and power outages since they do not rely on gas, diesel or propane infrastructure which are typically down in natural disasters.

You can customize a mobile solar generator from small emergency use systems with a single battery that put out from 1500 to 6000 Watts from the inverter to larger home or cabin units with larger battery banks and more panels that can put out from 3000 to 20,000 Watts. We can also help you build a trailer based unit that can supply up to 10,000 or even 20,000 Watts of power with up to 1000-2000 Watts of solar.
You can add small micro VAWT wind generators to any mobile generator to help charge the battery bank 24hrs a day if there is adequate wind.

3000 Watt Pure Sine (6000 Watt Peak) Modular Mobile SolarXport Generator with 100-150 Watt Flex Solar Panel

This Modular mobile solar system has two or three separate modules, one for the rolling base where the battery is located, second is where the Inverter is housed and the third module is where the solar Charge Controller is housed or you can put it in the second module depending on room. With the ability to separate the battery base module from the others, it is easier to pickup and put in a vehicle. Because it is modular, this allows for stacking various systems together for expandability as well as the ability to daisy chain more battery modules together.

Usage:

  • The 3000 Watt Inverter with the base system can run any number of items totaling 3000 watts for about half an hour. Anything 700-800 Watts for two hours and so on. 10*110Ah/Total watts of appliances = Run Time in Hrs
  • You can connect laptops, DC lighting or AC lighting from Inverter, run LCD TVs and sat dish receivers
  • Tools like drills and saws up to 12 Amps
  • Small fridges for emergencies and power outages – Fans or small AC units in power outages
  • Charge all your phones and tablets
  • Run DC or AC water pumps
  • Use at deer lease or remote cabin
  • Tailgate parties without a noisy and dirty gas generator!!


    Build Your Own Kit

    ~$1900 + Tax
  • 12v Modular Mobile Unit

    This mobile solar generator is based on a a Ridgid 3 piece modular rolling tool box that allows for easy mobility up to a 60lb battery, solar inverter, charge controller and various tools. This system is modular to gain access to the battery compartment in the base, and the other two modules for the inverter and charge controller. Battery module can be detached and moved separately from other two modules. Since the battery module is on it own and mobile, you can connect more together to give you more Amp Hrs of battery capacity.

    3000 Watt Pure Sine (6000 Watt Peak) DC to AC Inverter

    The base inverter in this unit is a 2000 Watt with a peak capability of 4000 Watts. The inverter is a Pure Sine Wave inverter and can handle most devices and tools connected to it up to 25 Amps. The largest Inverter that can fit the case is a 3000 Watt Inverter.
    The Inverter is one of the major components of any solar system whether Grid Tied or Off Grid because they convert solar and battery power which is DC voltage to AC voltage so you can use any of your regular 110-120V AC appliances. The Inverter in the mobile generator is an Off Grid or what we call a Point Of Use Inverter when using smaller inverters.

    100-150 Watt Flex/Lightweight Solar Panel

    The lightweight solar panel (4lbs) we have chosen for mobile systems can charge a single 100-110 Amp Hr battery in about 8-9 hrs of direct sunlight. If 3 solar panels are connected in parallel with T branch connectors the charge time is about 3-4 hrs. The charge time will vary if system is being used at the same time as solar charging. We also build and sell lightweight PVC ground mount units for a single panel up to 3 panels. The maximum amount of solar for this system is 360 Watts for a 12v battery unit.
    The solar panel or solar panels, are another major component for any solar system whether Grid Tied or Off Grid. For mobile solar generators, it is important to keep the weight at a minimum for transport so we choose 100 Watt up to 150 Watt Flex or lightweight thin film solar panels. You may also connect any other type of solar crystalline panels that are larger and less expensive than their flex/thin film counterparts. It is important to only connect as much watts of solar crystalline panels that the solar charge controller can handle which is 360 Watts in this model.

    110 Amp Hr SLA Deep Cycle Battery

    We recomend and use SLA (Sealed Lead Acid), AGM (Absorbed Glass Materials) or Lithium Ion batteries for our mobiles systems. This eliminates the off gassing of hydrogen gas into the air while charging is taking place. This is safer for indoor usage and tight confined spaces like RVs or trailers. Sealed batteries also will not spill acid while in motion or transporting. All batteries we use for renewable energy systems are Deep Cycle and allow for deep discharging without to much harm. The best batteries of course are Lithium and can do 1000s of cycles however they are costly right now and best for projects like Electric Vehicles or mobile solar systems where budget is not a factor. Calculate run time: 10*110Ah/Total watts of appliances = Run Time in Hrs

  • SLA - Sealed Lead Acid Battery - Least expensive SLA, a 110Ah battery is about $180
  • AGM - Absorbed Glass Material Battery - Least expensive, a 100Ah battery is about $190
  • Lithium - LiFePO4- Least expensive, a 100Ah battery is about $595


  • MPPT Solar Charge Controller

    MPPT (Maximum Power Point Tracking) solar charge controllers pull more power from the solar panels.
    The solar charge controller is required to charge a single battery or a larger battery bank and sits between the solar panels and the battery bank. It controls the charging of the battery bank and will not overcharge or damage the battery. GreenTechFusion If the customer wishes to use Lithium battery banks, you must match the correct solar charge controller that can charge Lithium properly with BMS.

    3000 Watt Pure Sine (6000 Watt Peak) Modular Mobile SolarXport Generator with 150 Watt Flex Solar Panel or 144 Watt Thin Film Panel

    This Modular mobile solar system has two or three separate modules, one for the rolling base where the battery is located, second is where the Inverter is housed and the third module is where the solar Charge Controller is housed or you can put it in the second module depending on room. With the ability to separate the battery base module from the others, it is easier to pickup and put in a vehicle. This is our most powerfull and highest quality mobile solar generator which uses Nissan Leaf Lithium cells.

    Usage:

  • The 3000 Watt Inverter with the base system can run any number of items totaling 3000 watts for about an hour. Anything 700-800 Watts for 2.6 hours and so on. 10*188Ah/Total watts of appliances = Run Time in Hrs
  • You can connect laptops, DC lighting or AC lighting from Inverter, run LCD TVs and sat dish receivers
  • Tools like drills and saws up to 125 Amps
  • Lithium allows for 1000s o charge cycles and long life
  • Small/med sized fridges for emergencies and power outages – Fans or small 500 watt AC units in power outages
  • Charge all your phones and tablets
  • Run DC or AC water pumps
  • Use at deer lease or remote cabin
  • Tailgate parties without a noisy and dirty gas generator!!


    Build Your Own Kit

    ~$2640 + Tax
  • 24v Modular Mobile Unit

    This mobile solar generator is based on a a Ridgid 3 piece modular rolling tool box that allows for easy mobility up to a 60lb battery, solar inverter, charge controller and various tools. This system is modular to gain access to the battery compartment in the base, and the other two modules for the inverter and charge controller. Battery module can be detached early and moved separately from other two modules. Since the battery module is on it own and mobile, you can connect more together to give you more Amp Hrs of battery capacity.

    3000 Watt (6000 Watt Peak) DC to AC Inverter

    The base inverter in this unit is a 2000 Watt with a peak capability of 4000 Watts. The inverter is a Modified Sine Wave inverter and can handle most devices and tools connected to it up to 18 Amps. The largest Inverter that can fit the case is a 3500 Watt Power Bright or 3000 Watt Pure Sine Wave Inverter.
    The Inverter is one of the major components of any solar system whether Grid Tied or Off Grid because they convert solar and battery power which is DC voltage to AC voltage so you can use any of your regular 110-120V AC appliances. The Inverter in the mobile generator is an Off Grid or what we call a Point Of Use Inverter when using smaller inverters.

    150 Watt Flex/Lightweight Solar Panel or 144 Watt Thin Film Panel

    The lightweight solar panel (4lbs) we have chosen for mobile systems can charge a single 100-110 Amp Hr battery in about 8-9 hrs of direct sunlight. If 3 solar panels are connected in parallel with T branch connectors the charge time is about 3-4 hrs. The charge time will vary if system is being used at the same time as solar charging. We also build and sell lightweight PVC ground mount units for a single panel up to 3 panels. The maximum amount of solar for this system is 360 Watts for a 12v battery unit.
    The solar panel or solar panels, are another major component for any solar system whether Grid Tied or Off Grid. For mobile solar generators, it is important to keep the weight at a minimum for transport so we choose 100 Watt up to 150 Watt Flex or lightweight thin film solar panels. You may also connect any other type of solar crystalline panels that are larger and less expensive than their flex/thin film counterparts. It is important to only connect as much watts of solar crystalline panels that the solar charge controller can handle which is 360 Watts in this model.

    24v Configured 188+ Amp Hr Nissan Leaf Lithium Battery Cells

    This is a prototype mobile solar generator configured with Nissan Leaf Lithium cell packs. Each cell is about 7.9v DC and can hold about 500 Watt hrs. When configured as a 3 cell battery pack in series, we get about 24v DC and over 188Ah capacity or more. Battery Management Systems do not need to be used in this application however recommended.

    MPPT Solar Charge Controller

    MPPT (Maximum Power Point Tracking) solar charge controllers pull more power from the solar panels.
    The solar charge controller is required to charge a single battery or a larger battery bank and sits between the solar panels and the battery bank. It controls the charging of the battery bank and will not overcharge or damage the battery. GreenTechFusion If the customer wishes to use Lithium battery banks, you must match the correct solar charge controller that can charge Lithium properly with BMS.

    High Power Mobile Solar
    Generators

    GreenTechFusion.com also builds custom High Power, cargo trailer style mobile solar/wind power generators that can easily power a house or emergency work camp.

    We can also help you build a trailer based unit that can supply up to 10,000 or even 20,000 Watts of power with up to 1000-2000 Watts of solar.
    You can add small 300 Watt VAWT wind generators to any mobile generator to help charge the battery bank 24hrs a day if there is adequate wind.

    6000 Watt and up Solar Cargo Trailers with 2, 3, 6 or 9 Polycrystalline Solar Panels or Flex/Thin Film Lightweight Solar Panels

    GreenTechFusion can build solar cargo trailers custom to your needs. From smaller mobile emergency backup systems to larger solar cargo trailers. Customer chooses and supplies cargo trailer for their needs. 6000 watt trailers and up to 20,000 watt peak capable trailers. Customer can choose between various battery technologies and charging systems. Customer can also choose less expensive but heavier poly/mono crystalline solar panels and custom mounting to trailer or choose lightweight Flex and Thin Film type of solar panels up to 2000-3000 Watts solar capacity.

    Usage:

  • The 6000 Watt Inverter with the base system with an 800Amp Hour battery bank can run any number of items totaling 6000 watts for about 1.3 hrs. Anything 600-700 Watts can run about 13 hrs. 10*800Ah/Total watts of appliances = Run Time in Hrs
  • You can connect laptops, DC lighting or AC lighting from Inverter, run LCD TVs and sat dish receivers
  • Tools like drills, saws and compressors will work just fine
  • Fridges and freezers for emergencies and power outages – Fans or small AC units in power outages
  • Charge all your phones and tablets
  • Run DC or AC water pumps
  • Power a small cabin or remote music event!


    ~$6000 + Tax - Customer Supplies Trailer
  • Cargo Trailer Mobile Unit - 16ft - 24ft

    Customer purchases their cargo trailer for GreenTechFusion to customize with complete Off Grid solar system. Typical costs on 16ft, double axle trailers start off about $5-6K for a new trailer.

    24v or 48v 6000 Watt to 20,000 peak Pure Sine Inverter(s) capable of 240v AC service up to 60-80 Amps

    The base inverter in the cargo trailers is a 6000 Watt Pure Sine Inverter with a peak capability of 12,000 Watts.
    The Inverter is one of the major components of any solar system whether Grid Tied or Off Grid because they convert solar and battery power which is DC voltage to AC voltage so you can use any of your regular 110-120V AC or 220-240v AC appliances. The Inverter in the mobile generator is an Off Grid with Grid battery charging in the event the customer has access to shore power to help charge battery bank.

    200-250 watt Polycrystalline 45lb solar panels or 100-150 Watt Flex 4-6lb or Thin Film Roll Up Solar Panels

    The solar panel or solar panels, are another major component for any solar system whether Grid Tied or Off Grid. For mobile solar generators, it is important to keep the weight at a minimum for transport so we choose to limit the weight and type of crystalline solar panels. You may also connect flex or thin film solar panels which are much lighter however costlier and you need more panels to get the same watt output that you get from crystalline panels. It is important to only connect as much watts of solar crystalline panels that the solar charge controller can handle and we calculate these pairings. Flex and Thin film solar panels can be stored and pulled out quickly for setup.

    Battery Technologies - 110 Amp hr SLA deep cycle batteries, sealed, no off gassing or AGM

    We focus on using SLA (Sealed Lead Acid), AGM (Absorbed Glass Materials) batteries for our mobiles systems. This eliminates the off gassing of hydrogen gas into the air while charging is taking place. This is safer for indoor usage and tight confined spaces like RVs or trailers. Sealed batteries also will not spill acid while in motion or transporting. All batteries we use for renewable energy systems are Deep Cycle and allow for deep discharging without to much harm. The best batteries of course are Lithium and can do 1000s of cycles however they are costly right now. Custom, prototype trailers with Lithium Ion batteries are an option as well with additional charging hardware needed for proper battery management. Customer decides with our recommendations on how many Amp Hrs the battery bank needs to be. Calculate run time: 10*800Ah/Total watts of appliances = Run Time in Hrs

    MPPT Solar battery charge controller(s) matched to battery and solar system specs

    MPPT (Maximum Power Point Tracking) solar charge controllers pull more power from the solar panels.
    The solar charge controller is required to charge a single battery or a larger battery bank and sits between the solar panels and the battery bank. It controls the charging of the battery bank and will not overcharge or damage the battery. GreenTechFusion If the customer wishes to use Lithium battery banks, you must match the correct solar charge controller that can charge Lithium properly with BMS.